Custom Triaxial Accelerometers
Te.Sense Engineering
Te.Sense Engineering, KTL’s custom solutions team, builds triaxial accelerometers for vehicle dynamics, ride and durability testing. They measure acceleration on all three axes with DC response, so they capture steady-state loads such as cornering and braking as well as vibration and shock.
Tell us what you need to measure, and we will configure the sensor to fit your test.
Options
What we can configure:
-
Measuring range from ±5 g to ±50 g
-
Cable length and connector type
-
Common or separate power supply for each axis
-
Mounting to suit your test fixture
Applications:
-
Vehicle dynamics and handling tests
-
Ride comfort and road vehicle testing
-
Vibration and shock monitoring
-
Low-frequency motion and modal analysis
-
Transportation and durability testing
Typical specifications (confirm values for your configuration):
-
Axes: 3, independent circuits
-
Measuring ranges: ±5, ±10, ±20, ±50 g
-
Sensitivity: 50 to 400 mV/g
-
Frequency response: 0 to 2,000 Hz
-
Natural frequency: 800 Hz
-
Non-linearity: ±0.5% FSO
-
Transverse sensitivity: < 3%
-
Damping ratio: 0.7
-
Shock limit: 5,000 g
-
Residual noise: 500 µV RMS
-
Spectral noise: 72 µg/√Hz
-
Zero-acceleration output: ±50 mV
-
Excitation: 8 to 36 V DC, < 5 mA
-
Bias voltage: 2.5 V DC
-
Output resistance: < 100 Ω
-
Full-scale output: ±2 V
-
Insulation resistance: > 100 MΩ
-
Turn-on time: < 100 ms
-
Operating temperature: −55 to +125 °C
-
Ground isolation: case isolated from mounting surface
Typical wiring (wire colors for X, Y, Z axis):
-
Cable: 15-conductor, shielded
-
−Excitation: BLK/BLU, BLK/YEL, BLK
-
−Output (2.5 V reference): WHT/BLU, WHT/YEL, WHT
-
+Excitation: RED/BLU, RED/YEL, RED
-
+Output: GRN/BLU, GRN/YEL, GRN
-
Not connected: BRN/BLU, BRN/YEL, BRN
Contact us for pricing and lead times
Get started today!


